1
|
supply and feed line hose 840 bar / 12184 PSI
|
2
|
threated ferrule
|
3
|
stand pipe insert, hose end 90 °, respectively 45° |
| 3a |
stand pipe insert, hose end, straight
|
Technical Data
di
|
da
|
Item No.
|
Packing unit
|
Miscellaneous |
4,0
|
8,6
|
100-001 |
50m coil
|
filled with grease NLGI class 2 |
4,0
|
8,6
|
100-002
|
50m coil
|
empty
|
| 6,3 |
11,3 |
100-011 |
100m coil |
filled with grease NLGI class 2 |
| 6,3 |
11,3
|
100-012 |
100m coil |
empty |
|
|
100-001 / 100-002 |
100-011 / 100-012 |
|
|
inner tube |
casing |
inner tube |
casing |
| material |
|
Termopl. Polyamid 6 |
Termopl. Polyurethan, mikrobenstabilisiert |
Termopl. Polyamid 12 |
Termopl. Polyurethan, mikrobenstabilisiert |
| tear strength |
DIN EN ISO 527
|
> 30N/mm2 |
> 18N/mm2 |
> 38N/mm2 |
> 20N/mm2 |
| elongation at break |
DIN EN ISO 527 |
> 50% |
> 380% |
> 250% |
> 320% |
hardness shore
|
DIN EN ISO 868
|
> D 60 +/- 3 |
> A 88 +/- 3 |
> D 61 +/- 3 |
> A 92 +/- 3 |
| temperature using limit |
-30°C until 80°C
for mediums to be pumped with "grease with corrosion protection additives": max. 60°C |
cracking pressure
|
DIN EN ISO 1402 pressurisation: 60s
20°C >800bar (84 MPa, 12184 psi), 60°C >450 bar,
permissable bending radius for 20°C >20 mm
|
Sizes and Tolerances
nominal size
|
4,0 x 8,6 mm d (internal + external)
|
6,3 x 11,3 mm |
| inner diameter |
3,90 x 4,10 mm
|
6,2 - 6,5 mm |
external diameter
|
8,50 x 8,75 mm
|
11,1 - 11,5 mm |
wall thickness eccentricity
|
max. 0,40 mm
|
max. 0,35 mm |
Colour
| inner tube |
natural
|
| casing |
black |
cable armour
|
white
|
| glue |
green-transparent |
print
|
white |
Supply and feed line hoses for centralized lubracation saystems are highly flexibel hoses connecting with connection fittings like threared ferrule and stand pipes insert (hose ends).The maximum operational pressure in the centralized lubrication system identifies the hose type. Please take in consideration that some systems can reach maximum pressure ratings during the different schiftings. Our supply and feed line hoses for centralized lubrication systems are regulary checked to make sure that there won't be any lacks of quality.
Please note!
We, as manufacturer of fittings for centralized lubrication systems, recommend for safety reasons that all fitting assembly should only be done by trained professionals.
These products are not for final customers!
Category: Products - imperial size fittings - supply and feed line hose
|
